AVProConnect AC-EX70-UHD Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Extensor AVProConnect AC-EX70-UHD. AVProConnect AC-EX70-UHD 16 páginas. 4k hdmi 2.0 extender with hdcp 2.2
Também para AVProConnect AC-EX70-UHD: Manual do utilizador (12 páginas), Manual do utilizador (12 páginas)

Imprimir página

AC-EX70-UHD-KIT

The Receiver

Indicator Troubleshooting Lights on the Receiver:

POWER - On the back by the power supply input:

that the power is connected. There are only two states for light:

• Light Is On = Power supply is connected and functioning

• Light Is Off = Power supply is not connected or no power present. - (In order

to have power try checking the power supply, USP, Outlet, etc...).

STATUS - On the front by HDMI port:

HDMI Display, Projector or sink is connected. The states are:

• Light Is On (Solid) = Sync w/ HDMI source is valid and solid.

• Light Is Flashing = The light flashes during the sync process. If it is flashing

continuously, you may still have a picture, but it is indicating that the Rx is

correcting a BE (Bit Error) to make the picture show on the display.

Things to check if

picture:

1. The display to make sure it is working properly (plug source or generator

into display directly).

2. Try a different HDMI Input - Some have different functions/capabilities per

display.

3. Try a longer HDMI cable. Some HDMI cables do not sync well at shorter

lengths.

4. Contact AVProConnect if these steps do not work.

BLUE HDMI STATUS LIGHT

BACK

RS232 Dip Switch: See

Power

RS232 Settings

Light

FRONT

(Blue)

This indicator shows that the

is flashing AND you have no

HDBaseT

OUT

Signal Light

(Red)

This indicator shows