AVProConnect AC-EX70-UHD Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Extensor AVProConnect AC-EX70-UHD. AVProConnect AC-EX70-UHD 16 páginas. 4k hdmi 2.0 extender with hdcp 2.2
Também para AVProConnect AC-EX70-UHD: Manual do utilizador (12 páginas), Manual do utilizador (12 páginas)

Imprimir página

AC-EX70-UHD-KIT

The Transmitter

Indicator Troubleshooting Lights on the Transmitter:

POWER - On the back by power supply input:

the power is connected. There are only two states for light:

• Light Is On = Power supply is connected and functioning.

• Light Is Off = Power supply is not connected or there is no power present.

(In order to have power: check the power supply, USP, Outlet, etc...)

SIGNAL - On front by HDMI Port:

source is connected. The states are:

• Light Is On (Solid) = Sync w/ HDMI source is correct and solid.

• Light Is Flashing = The light flashes during the sync process. If it is flashing

continuously, a picture may not be present.

If the

BLUE HDMI STATUS LIGHT

1. The source. Plug it directly into the display to be sure it's functioning

properly.

2. Try a longer HDMI cable. Some HDMI cables do not sync well at shorter

lengths.

3. Contact AVProConnect if these suggestions do not work.

BACK

RS232 Dip Switch: See

Power

RS232 Settings

Light

FRONT

(Red)

(Blue)

This indicator shows that the HDMI

is flashing, check the following:

HDBaseT

OUT

Signal Light

This is an indicator that