Allied Telesis AT-PB200 Series Manual de instalação rápida

Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor Allied Telesis AT-PB200 Series. Allied Telesis AT-PB200 Series 2 páginas. Fast ethernet switches

Imprimir página

Allied Telesis AT-PB200 Series Manual de instalação rápida

Technical Specifications

Maximum Operating Temperature:

Maximum Storage Temperature:

Operating Altitude:

Humidity:

EMC:

Safety:

Electrical Safety and Emission Statement

Standards: This product meets the following standards.

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to

Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to

operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

RFI Emission

EN55022 Class A

Warning: In a domestic environment this product may cause radio interference in which case the user may be

required to take adequate measures.

Immunity

EN55024

Electrical Safety

EN60950, UL1950 (UL/cUL)

Laser

EN60825

from Allied Telesyn, Inc.

Allied Telesyn, Inc.

960 Stewart Drive, Suite B

Sunnyvale, CA 94085 USA

Tel 1 (408) 730-0950 • Fax 1 (408) 736-0100

Visit our web site at: www.alliedtelesyn.com

0° C to 40° C (32° F to 104° F)

-20° C to 80° C (-4° F to 176° F)

Up to 3,048 meters (10,000 feet)

5% to 80% (non-condensing)

FCC Class A, EN55022 Class A, EN55024

EN60825, EN60950, UL1950 (UL/cUL)

AT-PB200 Series

Fast Ethernet Switches

Quick Install Guide

For use in the PowerBlade Chassis

Overview

The AT-PB200 Series Fast Ethernet Switches are hot swappable modules for the

PowerBlade Chassis. The AT-PB200 Series Switches are designed to interconnect LAN

devices and subnetworks over large distances into an integrated network. These dual-

port switches can also be used to improve the performance of your network by dividing it

into smaller, more manageable segments. Each switch features a 10/100Base-TX

twisted pair port and an 100Base-FX fiber optic port. The twisted pair port has an RJ-45

connector and a maximum operating distance of 100 meters (328 feet). The fiber optic

port has a FJ, SC, ST, LC, MT-RJ, or VF-45 connector and a maximum operating

distance of 2 kilometers (1.2 miles) to 100 kilometers (62 miles), depending on the

model.