Dell 2707WFP - UltraSharp - 27" LCD Monitor Manual do utilizador - Página 37
Procurar online ou descarregar pdf Manual do utilizador para Ambiente de trabalho Dell 2707WFP - UltraSharp - 27" LCD Monitor. Dell 2707WFP - UltraSharp - 27" LCD Monitor 49 páginas. Flat panel monitor
Também para Dell 2707WFP - UltraSharp - 27" LCD Monitor: Manual de configuração (2 páginas), Ficha técnica (4 páginas)
Imprimir página
Back
Wide Mode
H Position
V Position
Sharpness
Zoom
Horizontal Pan
Vertical Pan
Pixel Clock
Phase
Audio Option
Display Info
Display
Exit Menu
MENU SETTINGS
Push
to go back to the main menu.
Adjust the image ratio as 1:1, aspect(16:10) or full screen.
Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use
Use the Zoom function to zoom in to specific area of interest.
Use the
and
keys to zoom in and out.
After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.
Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu
Settings'.
Use the
and
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
To turn on or off Audio Power during Power Save mode.
All the settings related to this monitor.
Reset the image to the original factory setting.
Push
to exit the OSD main menu.
or
to adjust the sharpness from '0' to '100' .