Dell PowerVault TL2000 Perguntas frequentes - Página 16

Procurar online ou descarregar pdf Perguntas frequentes para Armazenamento Dell PowerVault TL2000. Dell PowerVault TL2000 26 páginas. Tape library
Também para Dell PowerVault TL2000: Notas de lançamento (3 páginas), Começar a trabalhar (38 páginas), Manual de início rápido (7 páginas), Manual do software (16 páginas), Manual de configuração (22 páginas), Manual de informações importantes (10 páginas), Adenda ao Manual do Utilizador (2 páginas), Manual de iniciação (3 páginas), Instruções de anexação (17 páginas), Brochura (4 páginas), Manual do utilizador (20 páginas)

Dell PowerVault TL2000 Perguntas frequentes
How do I configure EKM to run as a Windows service in a 64-bit
environment?
In a primary and redundant EKM configuration, this needs to be configured for
each platform.
NOTE:
There is a known issue with the LaunchEKMService.exe file which causes it
to fail to start in a Windows 64-bit environment. The current LaunchEKMService
is a 32-bit application and is not be able to execute a call to a 64-bit application.
1 Locate the StartServer.bat file in your EKM directory.
NOTE:
2 Right click the StartServer.bat file, select send to, and then select desktop
(create short cut).
3 Navigate to StartProgramsStartup.
Right click Startup and select Open.
4 Copy the shortcut created in the desktop into the startup folder.
5 To test, stop the EKM server by selecting Stop Server in the EKM GUI.
Then navigate to StartProgramsStartup and click Shortcut to start
the Server.
Verify your EKM server is once again running.
NOTE:
In a 64-bit Windows environment, the user account where the shortcut was
created must remain logged in for the EKM service to remain running. If the user
account logs out, backup jobs requiring encryption keys fail due to the lack of an
EKM server to service the key requests. This issue does not occur in a 32-bit
Windows environment.
EKM appears to start as a Windows service but shows as stopped when
I check or refresh the services
Most likely there is an issue with the path variables due to an incorrect/invalid
entry. Verify that you have set the ClassPath and JavaPath variables correctly in
the registry. The variables should contain the following paths if they are correct.
Pay close attention to the location of the semicolons. Semicolons should only be
used between paths.
1 Click Start Settings Control Panel.
2 Double click System.
16
Dell Encryption Key Manager and Library Managed Encryption
The default directory is C:\ekm\ekmserver.