Dell PowerVault TL2000 SSS - Sayfa 16

Depolama Dell PowerVault TL2000 için çevrimiçi göz atın veya pdf SSS indirin. Dell PowerVault TL2000 26 sayfaları. Tape library
Ayrıca Dell PowerVault TL2000 için: Sürüm Notları (3 sayfalar), Başlarken (38 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar), Yazılım Kılavuzu (16 sayfalar), Yapılandırma Kılavuzu (22 sayfalar), Önemli Bilgiler Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu Eki (2 sayfalar), Başlangıç Kılavuzu (3 sayfalar), Ek Talimatları (17 sayfalar), Broşür (4 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

How do I configure EKM to run as a Windows service in a 64-bit

environment?

In a primary and redundant EKM configuration, this needs to be configured for

each platform.

NOTE:

There is a known issue with the LaunchEKMService.exe file which causes it

to fail to start in a Windows 64-bit environment. The current LaunchEKMService

is a 32-bit application and is not be able to execute a call to a 64-bit application.

1 Locate the StartServer.bat file in your EKM directory.

NOTE:

2 Right click the StartServer.bat file, select send to, and then select desktop

(create short cut).

3 Navigate to StartProgramsStartup.

Right click Startup and select Open.

4 Copy the shortcut created in the desktop into the startup folder.

5 To test, stop the EKM server by selecting Stop Server in the EKM GUI.

Then navigate to StartProgramsStartup and click Shortcut to start

the Server.

Verify your EKM server is once again running.

NOTE:

In a 64-bit Windows environment, the user account where the shortcut was

created must remain logged in for the EKM service to remain running. If the user

account logs out, backup jobs requiring encryption keys fail due to the lack of an

EKM server to service the key requests. This issue does not occur in a 32-bit

Windows environment.

EKM appears to start as a Windows service but shows as stopped when

I check or refresh the services

Most likely there is an issue with the path variables due to an incorrect/invalid

entry. Verify that you have set the ClassPath and JavaPath variables correctly in

the registry. The variables should contain the following paths if they are correct.

Pay close attention to the location of the semicolons. Semicolons should only be

used between paths.

1 Click Start Settings Control Panel.

2 Double click System.

Dell Encryption Key Manager and Library Managed Encryption

The default directory is C:\ekm\ekmserver.