Dell poweredge VRTX Manual de iniciação - Página 25
Procurar online ou descarregar pdf Manual de iniciação para Interruptor Dell poweredge VRTX. Dell poweredge VRTX 30 páginas. Server
Também para Dell poweredge VRTX: Manual do utilizador (35 páginas), Nota de lançamento (5 páginas), Manual de iniciação (14 páginas), Manual de Referência e Início Rápido (2 páginas), Manual técnico (45 páginas), Começar a trabalhar (2 páginas)
Imprimir página
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
System Image Download
When the device boots, it decompresses the system image from the flash
memory area and runs it. When a new image is downloaded, it is saved in the
other area allocated for the other system image copy.
On the next boot, the device decompresses and runs the image from the
currently active system image.
A system image can be downloaded through a TFTP server.
To download the system image from a TFTP server, ensure that an IP address
is configured on one of the device ports and pings can be sent to the TFTP
server. In addition, ensure that the file to be downloaded is saved on the
TFTP server.
To download a system image through the TFTP server:
1 Enter the show version command, to verify which software version is
currently running on the device. The following is an example of the
information that appears:
console# show version
SW version
Boot version
HW version
console#
2 Enter the show bootvar command, to verify which system image is
currently active. The following is an example of the information that is
displayed:
console# show bootvar
Image
Filename
-----
---------
1
image-1
2
image-2
console#
3 Enter the one of the following commands to copy a new system image to
the current unit:
To copy a new system image to the device:
copy tftp://{tftp address}/{file name} image
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Plasma\GSG\Plasma_UGUsing_CLI.fm
1.0.0.17 ( date
1.0.0.2
( date
Version
Date
---------
---------------------
1.0.0.13
04-Aug-2010
1.0.0.12
29-Jul-2010
05-Sep-2012 time
22-Aug-2012 time
08:27:30
17:02:26
12:05:41 )
15:56:52 )
Status
------
Active*
Not active
Using the CLI
25