EarthWay 2100P Estate Manual de instruções de montagem e funcionamento - Página 3
Procurar online ou descarregar pdf Manual de instruções de montagem e funcionamento para Espalhador EarthWay 2100P Estate. EarthWay 2100P Estate 8 páginas. Broadcast spreader
Também para EarthWay 2100P Estate: Manual de instruções de montagem e funcionamento (6 páginas)
Imprimir página
Bushing
Drawbar
Frame Brace
7. Slide axle bushing over axle and into axle bearing to both sides as shown.
8. Install drive wheel to axle using pin hole nearest to lower handles as shown. Insert 1¾"
Cotter pin through wheel and through axle. Bend with pliers to prevent pin from falling
out.
9. Install coast wheel to axle using outside pin hole. As shown, add the flat washer, and
insert ¾" Cotter pin through axle (NOT THRU THE WHEEL). Bend with pliers to
prevent pin from falling out.
Control
Wire
Small hole
for Control wire
Shut-Off
Plate
10. Install Control Assembly by inserting the bent wire end into the
small hole in the shut-off plate from the bottom of the spreader as shown
above. TIP: The wire will fit into the hole to the first bend, then you need
to lay the Control Wire into the Lower Housing Clip. Close the Lower
Housing Clip with a snap and secure with #10 x ⅝" screw and snug to a
loose fit - d
t
.
o not
ightEn
TURN SPREADER UPRIGHT ON TO WHEELS.
¾" Cotter Pin
Gearbox
&
Axle
Flat Washer
Control
Assembly
#30
Rate Handle
1¾" Cotter Pin
Control Wire
Lower Housing Clip
Larger Hole
#10 x 5/8"
Screw
Lower Housing Clip
Larger Hole
PAGE 3