EarthWay 2100P Estate Manual de instruções de montagem e funcionamento - Página 5
Procurar online ou descarregar pdf Manual de instruções de montagem e funcionamento para Espalhador EarthWay 2100P Estate. EarthWay 2100P Estate 8 páginas. Broadcast spreader
Também para EarthWay 2100P Estate: Manual de instruções de montagem e funcionamento (6 páginas)
Imprimir página
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-years
to the end user with the original purchase receipt for at home use. If used for business, the warranty is 90-days. If a
manufacturing non-conformance is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product
at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and
tear as determined by Earthway. Earthway at its discretion may require that the part(s) or product be returned along with the
original purchase receipt at owners' expense for examination and compliance with the terms of this warranty. Do not return
any product without first receiving authorization from Earthway Products, Inc. To seek remedy under this warranty, contact
Earthway Products, Inc. at 574-848-7491, [email protected] or write to Earthway Products, Inc. P.O. Box 547 Bristol,
Indiana 46507 and describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only
the part(s) or product; any labor charges associated with repair or replacement of non-conformances are specifically excluded.
Due to the corrosive nature of most fertilizers and ice melt products, Earthway Products, Inc. makes no warranty against and
specifically excludes part(s) or product degradation or failure due to corrosion or its effects. Clean and dry your spreader
thoroughly after each use, as a preventative measure, coat all metal parts with a light oil or silicon spray.
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the
manufacturer. Be sure to give the following information when
ordering.
; Model Number
; Part Number
; Part Description
You can contact us by calling (574) 848-7491 or 800-294-0671
to place an order with a credit card.
Questions? [email protected]
The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of
material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the
above conditions, the manufacturer makes no warranty as to the uniformity of coverage actually obtained from the settings
listed.
FULL Rate
5-YEAR LIMITED WARRANTY
SPREAD PATH
HALF Rate
(one pass)
© 2013 Earthway Products, Inc. All rights reserved
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this
spreader.
1. Obtain proper setting for material to be used from the RATE
SETTING CHART included with this spreader.
2. Move stop bolt on rate gauge assembly to the proper setting.
3. While pushing spreader forward, pull control lever back to
stop bolt.
4. To stop, push lever forward to close flow holes before you stop
moving.
5. When finished, empty any remaining material from hopper.
6. Thoroughly wash spreader and allow to dry before storing.
Light oiling can prevent corrosion.
(two passes)
PAGE 5