EarthWay 2170 Manual de instruções de montagem e funcionamento - Página 5

Procurar online ou descarregar pdf Manual de instruções de montagem e funcionamento para Espalhador EarthWay 2170. EarthWay 2170 6 páginas. Commercial broadcast spreader with side spread control
Também para EarthWay 2170: Manual de instruções de montagem e funcionamento (6 páginas), Manual de instruções de montagem e funcionamento (8 páginas), Manual de Instruções (8 páginas), Manual de instruções de montagem (12 páginas), Manual de instruções de montagem (10 páginas)

EarthWay 2170 Manual de instruções de montagem e funcionamento
Before filling hopper, become familiar with the operation of this spreader.
5 Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or from our web site
under the MANUALS SECTION.
5 Move stop bolt on rate gauge assembly to the proper setting.
5 While pushing spreader forward, pull control lever back to stop bolt.
5 To stop, push lever forward to close flow holes before you stop moving.
5 When finished, empty any remaining material from hopper.
5 Thoroughly wash spreader and allow to dry before storing. A coating of light oil will help prevent corrosion.
5 If you must use Rock Salt, Remove agitator when using Rock Salt to prevent damage to the gearbox.
The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of
material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the
above conditions, the manufacturer makes no warranty as to the uniformity of coverage actually obtained from the settings
listed.
Full Rate Path
Finish
Start
All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when ordering.
; Model Number
; Part Number
; Part Description
You can contact us by calling (574) 848-7491 or 800-294-0671 to place an order with a credit card.
OPERATING INSTRUCTIONS
Half Rate Path
Finish
Start

HOW TO ORDER SPARE PARTS

PAGE 5