EarthWay 2170 Руководство по сборке и эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Разбрасыватель EarthWay 2170. EarthWay 2170 6 страниц. Commercial broadcast spreader with side spread control
Также для EarthWay 2170: Руководство по сборке и эксплуатации (6 страниц), Руководство по сборке и эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц), Инструкция по сборке Руководство (12 страниц), Инструкция по сборке Руководство (10 страниц)

Before filling hopper, become familiar with the operation of this spreader.

5 Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or from our web site

under the MANUALS SECTION.

5 Move stop bolt on rate gauge assembly to the proper setting.

5 While pushing spreader forward, pull control lever back to stop bolt.

5 To stop, push lever forward to close flow holes before you stop moving.

5 When finished, empty any remaining material from hopper.

5 Thoroughly wash spreader and allow to dry before storing. A coating of light oil will help prevent corrosion.

5 If you must use Rock Salt, Remove agitator when using Rock Salt to prevent damage to the gearbox.

The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of

material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the

above conditions, the manufacturer makes no warranty as to the uniformity of coverage actually obtained from the settings

listed.

Full Rate Path

Finish

Start

All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when ordering.

; Model Number

; Part Number

; Part Description

You can contact us by calling (574) 848-7491 or 800-294-0671 to place an order with a credit card.

OPERATING INSTRUCTIONS

Half Rate Path

Finish

Start

HOW TO ORDER SPARE PARTS

PAGE 5