EarthWay 2170 Руководство по сборке и эксплуатации

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Разбрасыватель EarthWay 2170. EarthWay 2170 6 страниц. Commercial broadcast spreader with side spread control
Также для EarthWay 2170: Руководство по сборке и эксплуатации (6 страниц), Руководство по сборке и эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц), Инструкция по сборке Руководство (12 страниц), Инструкция по сборке Руководство (10 страниц)

EarthWay 2170 Руководство по сборке и эксплуатации
2170 C
ommerCial
B
roadCast
ASSEMBLY and OPERATING INSTRUCTIONS
PLEASE CALL IF YOU ARE MISSING ANY PARTS, HAVE ANY DIFFICULTY IN ASSEMBLY, OR HAVE ANY QUESTIONS
REGARDING THE SAFE OPERATION OF THIS SPREADER. THIS MODEL INCLUDES LIFETIME TECHNICAL SUPPORT
SUPPORT HOT LINE: 574-848-7491 or 800-294-0671,
HELPFUL HINTS:
; If your spreader does not spread evenly, be sure the FRONT on the gear box points to the front of the spreader. The
impeller must turn clockwise. Reversing the gearbox will cause the impeller to turn counter clockwise. Clean the impeller
plate after each use. Fertilizer stuck on the impeller blades will cause uneven spreading.
; Your spreader is designed to be pushed at three miles per hour, which is a brisk walking speed. Slower or faster speeds
will change the spread patterns. Wet fertilizer will also change the spread pattern and flow rate. Clean and dry your
spreader thoroughly after each use. A coating of light spray oil on all metal parts inside & out will help prevent corrosion.
Wash between the shut off plate and bottom of the hopper. Do not use powdered materials.
; Gears are permanently lubricated at the factory. Do not open the gearbox or dirt may enter.
33117
32100
Qty 1
Qty 2
36210
Qty 2
36214
31100
Qty 4
Qty 4
12152
12148
Qty 2
Qty 2
1. Remove and identify all loose parts from carton
(Qty 4 #36214)
1/4-20 X 1-1/2"
Phillips Panhead
s
preader
READ THE DIRECTIONS BEFORE ASSEMBLY
36300
32103
Qty 6
Qty 9
33108
36105
Qty 1
Qty 1
33109
Qty 1
31120
Qty 5
31106
Qty 2
.
(Qty 4 #36300)
1/4-20 SS Locknut
:
@
email
teChsupport
earthway
r
s
oCk
alt and
should not Be used in this spreader as
it will damage gearBox and Can void
u
se only granular materials
13
16
31
2. Position hopper on side. Install frame using (4) 1/4-20 x 1-1/2" Pan
Head Phillips bolts and (4) 1/4-20 nylon insert locknuts. First put bolts
through holes in frame then through holes in bottom of hopper. Secure
with locknuts. TIGHTEN THESE LOCKNUTS NOW - DO NOT
TIGHTEN WITH POWER TOOLS.
EarthWay
EarthWay
EV-N-SPRED
EV-N-SPRED
GT
GT
Rev. 3-10
.
SKYPE: EARTHWAY.TECH
Com
p
owdered materials
.
warranty
24
23
17
28
25
26
Pt# 52164
®
®
.
12
11
9
PAGE 1