Christie CP2230 Folha de instruções

Procurar online ou descarregar pdf Folha de instruções para Racks & Stands Christie CP2230. Christie CP2230 9 páginas. Christie rack mount pedestal
Também para Christie CP2230: Folha de instruções (6 páginas), Boletim Técnico (6 páginas), Boletim Técnico (8 páginas), Manual (2 páginas), Manual de instalação e configuração (19 páginas)

INTRODUCTION

The following procedure should be performed whenever the coolant system needs to be refilled.

NOTICE: Never allow the pump to run dry to avoid damaging it.

KITS REQUIRED

• #003-001837-xx Coolant Refill Kit

INSTRUCTIONS

SERIES I

Series 1 projectors include the CP2000-S/-SB/-h/-i/-X/-XB/-Z/-M/-MR and the Roadie 25K/HD+30K/

HD+35K. For details on how to flush the coolant system on these models refer to, Roadie 25K/

HD+30K/HD+35K, CP2000-S/-SB/-h/-i/-X/-XB/-M/-MR/-ZX Coolant Flush Instruction Sheet

(P/N: 020-100179-03).

CP2000-S/-SB/-H/-I/-X/-XB AND ROADIE 25K/D+30K/HD+35K

ACCESS COOLING SYSTEM

1. Remove the projector lid. On the Roadie 25K/HD+30K/HD+35K or CP2000-X/-XB, open the

igniter door (Figure 1, left). On a CP2000-S/-SB/-i/-h (Figure 1, right), open the non-operator

side pedestal door and skip to Step 3.

Coolant Refill Instruction Sheet

020-100686-01 Rev. 1 (03-2011)

(includes JeffCool E105 jug of coolant, refill bottle, funnel, MSDS sheet)

Figure 1 Access Cooling System

Coolant Refill

Instruction Sheet

1 of 9