Christie CP2230 Instruction Sheet

Browse online or download pdf Instruction Sheet for Racks & Stands Christie CP2230. Christie CP2230 9 pages. Christie rack mount pedestal
Also for Christie CP2230: Instruction Sheet (6 pages), Technical Bulletin (6 pages), Technical Bulletin (8 pages), Manual (2 pages), Installation And Setup Manual (19 pages)

Print Page
Christie CP2230 Instruction Sheet
INTRODUCTION
The following procedure should be performed whenever the coolant system needs to be refilled.
NOTICE: Never allow the pump to run dry to avoid damaging it.
KITS REQUIRED
• #003-001837-xx Coolant Refill Kit
INSTRUCTIONS
SERIES I
Series 1 projectors include the CP2000-S/-SB/-h/-i/-X/-XB/-Z/-M/-MR and the Roadie 25K/HD+30K/
HD+35K. For details on how to flush the coolant system on these models refer to, Roadie 25K/
HD+30K/HD+35K, CP2000-S/-SB/-h/-i/-X/-XB/-M/-MR/-ZX Coolant Flush Instruction Sheet
(P/N: 020-100179-03).
CP2000-S/-SB/-H/-I/-X/-XB AND ROADIE 25K/D+30K/HD+35K
ACCESS COOLING SYSTEM
1. Remove the projector lid. On the Roadie 25K/HD+30K/HD+35K or CP2000-X/-XB, open the
igniter door (Figure 1, left). On a CP2000-S/-SB/-i/-h (Figure 1, right), open the non-operator
side pedestal door and skip to Step 3.
Coolant Refill Instruction Sheet
020-100686-01 Rev. 1 (03-2011)
(includes JeffCool E105 jug of coolant, refill bottle, funnel, MSDS sheet)
Figure 1 Access Cooling System
Coolant Refill
Instruction Sheet
1 of 9