360 Yield 360 Y-DROP JOHN DEERE 4930 Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Equipamento agrícola 360 Yield 360 Y-DROP JOHN DEERE 4930. 360 Yield 360 Y-DROP JOHN DEERE 4930 11 páginas.

Imprimir página

INSTALL YOKE ASSEMBLIES

ON THE OEM PRIMARY BOOM

Figures 13 and 14

Step 1

With the U-bolt pointing to the rear,

install the yoke mount (1) and flange

nuts to upper boom section.

Step 2

With the square U-bolt threads pointing

up and using the extra thick washer and

Nylock nut, install yoke mount (2) to the

360 Y-DROP boom section.

Step 3

Using pins, install the yoke straps (3)

between the upper boom and 360

Y-DROP boom. Using the flange nuts,

tighten the 1-1/4" carriage bolts.

Repeat Steps 1-3 for the remaining yokes on

the OEM primary booms. Yokes should be spaced

approximately 60" (±5") apart.

NOTE: A 4" x 3/8" thick plate has been provided to

be used as a spacer and should be installed between

the OEM boom and the upper yoke mount if needed.

INSTRUCTIONS 360 Y-DROP

Figure 13

Figure 14

360YIELDCENTER.COM

JOHN DEERE 4930/4940