360 Yield 360 Y-DROP MILLER Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Equipamento agrícola 360 Yield 360 Y-DROP MILLER. 360 Yield 360 Y-DROP MILLER 12 páginas.

Imprimir página

INSTALL MOUNT ASSEMBLIES

II.

ON THE OEM PRIMARY BOOM

Figures 2 and 3

Step 1

With the threads pointing down, install

diamond U-bolt (1) on the top side of the

OEM primary boom.

Bag AM (5.75") - mounting locations containing

the added OEM gussets on primary booms

Bag AL (5.0") - mounting locations with no

added OEM gussets on primary booms

Step 2

Install diamond boom clamp (2) on the

bottom of the OEM primary boom.

Step 3

Install 14" top plate (3).

Step 4

Install bracket assembly (4) and flange

lock nuts (5).

Hardware Kit D

Step 5

Install carriage bolts (6) and flange nuts.

Hardware Kit D

Step 6

Install extension tube (7).

Figure 4

Step 7

Install boom bracket (1) onto the

extension tube.

Step 8

With the threads pointing down install

square U-bolts (2) plus the 5/16" extra

thick washers and the 5/16" nuts.

Hardware Kit A

Step 9

Install stop bolts (3) at both the front and

the rear of the extension tube.

Hardware Kit B

Figure 5

Step 10

Install stainless steel set screws and

jam nut assemblies (1) onto the bracket

assemblies.

Hardware Kit D

Repeat Steps 1-10 the remaining mount assemblies

on the OEM primary boom.

INSTRUCTIONS 360 Y-DROP

Figure 2

Figure 3

Figure 4

Figure 5

360YIELDCENTER.COM

MILLER

NEW HOLLAND