IMG 1010 Quick Start Guide
Start the services nfs, vsftpd, and dhcpd, services
1. As a Super User, start all the services and configure them to restart when GCEMS
server is rebooted. Enter the following commands to start the nfs server.
#/sbin/service nfs start
#/sbin/service nfs status
#/sbin/chkconfig nfs on
GCEMS)
#/sbin/chkconfig nfs --list (Verify that runlevels 3,4 and 5 are all on.)
Example:
nfs
2. Enter the following commands to start vsftpd service.
#/sbin/service vsftpd start
#/sbin/service vsftpd status
#/sbin/chkconfig vsftpd on
of GCEMS)
#/sbin/chkconfig vsftpd --list (Verify that runlevels 3,4 and 5 are all on.)
3. Enter the following commands to start dhcpd service.
#/sbin/service dhcpd start
#/sbin/service dhcpd status
#/sbin/chkconfig dhcpd on
of GCEMS)
#/sbin/chkconfig dhcpd --list (Verify that runlevels 3,4 and 5 are all on.)
4. Enter the following commands to start ntpd service.
#/sbin/service ntpd start
#/sbin/service ntpd status
#/sbin/chkconfig ntpd on
GCEMS)
#/sbin/chkconfig ntpd --list (Verify that runlevels 3,4 and 5 are all on.)
5. Once these services are running and the IMG software build is available the software
can be downloaded. Refer to the IMG 1010 - Software Installation and Setup >
IMG 1010-Downloading System Software topic in the
download the system software from the GCEMS server to the IMG 1010.
(Start the nfs service)
(Verify whether nfs is running or not)
(Configure nfs service to restart after a reboot of
0:off
1:off
2:on
(Start the vsftpd service)
(Verify whether vsftpd is running or not)
(Configure vsftpd service to restart after a reboot
(Start the dhcpd service)
(Verify whether dhcpd is running or not)
(Configure dhcpd service to restart after a reboot
(Start the ntpd service)
(Verify whether ntpd is running or not)
(Configure ntpd service to restart after a reboot of
1.
3:on
4:on
5:on
online documentation
6:off
and
16
Imprimir página