Dialogic IMG 1010 Manual de início rápido - Página 18

Procurar online ou descarregar pdf Manual de início rápido para Porta de entrada Dialogic IMG 1010. Dialogic IMG 1010 18 páginas. Connecting dc power
Também para Dialogic IMG 1010: Manual de instruções de instalação (6 páginas), Manual de início rápido (11 páginas), Manual de início rápido (10 páginas), Manual de início rápido (10 páginas), Manual de instruções de instalação (9 páginas), Manual de início rápido (4 páginas)

IMG 1010 Quick Start Guide

Starting ClientView to start Configuring Switch

Once the IMG 1010 has the system software installed, the cabling is connected, and the

GCEMS server has been configured, the ClientView application needs to be started. Once

started, the clientView application can be used to configure the system. Follow procedure

below to start ClientView.

1. Double Click on the IMG ClientView icon on the desktop -or- enter the ./ClientView

command from the /opt/dialogic/IMG/IMGUserInterface/ClientView directory.

2. An About Dialogic ClientView box will appear. Click on the Close button at the bottom.

3. A Client Socket box appears and asks for username and password. Enter username

and password and select OK. The default User and password are:

Username

Password

4. EventView and ClientView screens will appear. GCEMS and ClientView are now

running.

5. Right Click on the Dialogic IMG EMS object in the ClientView tree and select New

Logical IMG. Enter a name for this Logical Node Group.

6. Right click on The Logical IMG and select New Physical IMG.

7. In the object that appears, enter a name in the name field and enter the IP address

given to the <CTRL 0> interface in the IP address (nn.nn.nn.nn) field. The GCEMS will

now connect. Once connected, ClientView will appear like the following screen capture.

The IMG 1010 is now ready to be configured using ClientView. Refer to the

Configuration section of the online documentation.

admin