Miller Spoolmate 3035 Manual do Proprietário - Página 20
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de soldadura Miller Spoolmate 3035. Miller Spoolmate 3035 28 páginas. Wire feeder spool gun
Também para Miller Spoolmate 3035: Manual do Proprietário (36 páginas), Manual do Proprietário (28 páginas)
Imprimir página
5-2. Changing Drive Rolls
It may be necessary to remove
drive roll side of gun case to
change lower drive roll.
Tools Needed:
OM-1216 Page 16
4
3
2
1
8
7
6
9
Y Turn Off power at welding
power source first.
1
Drive Roll Cover
Remove cover.
Changing Push Roll:
To remove push roll:
2
Push Roll Screw
3
Washer
4
Push Roll
Remove screw and washer, and lift
out drive roll.
To install drive roll:
Slide drive roll onto shaft and se-
cure with washer and screw.
Changing Lower Drive Roll:
To remove drive roll:
5
Lower Drive Roll Screw
6
Washer
7
Lower Drive Roll
8
Drive Roll Key
9
Drive Roll Shaft
Remove screw and washer, and lift
out drive roll. Note: drive roll key will
come out with drive roll.
To install drive roll:
Place drive roll key in slot in drive
roll shaft.
Line slot in drive roll up with drive
roll key, and slide drive roll onto
shaft.
Secure drive roll with washer and
5
screw.
Reinstall gun case, if applicable.
Reinstall drive roll cover.
801 893-B