DIAMO ONE Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Máquina de café DIAMO ONE. DIAMO ONE 20 páginas.

Frothing Milk

With the power on, turn the Coffee/Steam Knob to the

"Coffee" position, then push the Steam button

Steam button will light up a steady blue

Power button will flash red

heats up. When the Power button turns green,

are ready to continue.

DO NOT TOUCH THE STEAM TUBE while foaming or for

three minutes afterwards. It gets very hot. Use the

rubber grip if you need to move the tube.

It is recommended that you prime the steam pump

prior to steaming. To do so: Position a cup under

the Steam Tube and turn the Coffee/Steam Knob to the

"Steam" position. A small amount of water will shoot

out of the tube as the steam builds up. It takes about

ten seconds for steam to come out. Turn the Coffee/

Steam Knob to "Coffee" to stop the steam.

Put milk into your frothing cup and place it under the

steam tube. Make sure the head of the Steam Tube is

below the surface of the milk to avoid splashing or

spraying. Once the tip of the Steam Tube is below the

surface of the milk, turn the Coffee/Steam Knob to

"Steam" to start frothing your milk. When you have

enough foam, turn the Coffee/Steam Knob back to

"Coffee" to stop the steam.

To finish the steam cycle and clean out the Steam Tube,

put a cup under the Steam Tube, press the Steam

button and turn the Coffee/Steam Knob to "Steam."

Water will again shoot out of the nozzle. Count for five

seconds and turn the Coffee/Steam Knob back to

"Coffee" to stop. This must be done after every use of

the Steam Tube to avoid clogging. When cool, clean

the Steam Tube with a wet cloth or sponge. It is

recommended to thoroughly clean the Steam Tube

after use (See Cleaning the Steam Tube on page 11).

while the Diamo One

. The

and the

you