Burley NOMAD RACK Manual de instruções e de segurança do proprietário - Página 6

Procurar online ou descarregar pdf Manual de instruções e de segurança do proprietário para Veículo utilitário Burley NOMAD RACK. Burley NOMAD RACK 18 páginas. Bicycle trailer
Também para Burley NOMAD RACK: Brochura e especificações (5 páginas), Manual do proprietário e manual de segurança (20 páginas), Manual de instruções e de segurança do proprietário (12 páginas), Manual do proprietário e de segurança (4 páginas), Manual de instruções e segurança do proprietário (12 páginas), Manual de instruções e de segurança do proprietário (11 páginas), Manual do proprietário e de segurança (20 páginas)

Mounting the Reflectors

Nomad

: The reflector brackets mount on the outside rear of each side

™

panel, 2.5" up from the plastic connector on the side panel. (The holes

for the mounting screws are covered by the fabric.)

To mount the bracket, insert a self-tapping bracket

screw through the hole in the curved section of the

reflector and drive the screw through the fabric,

into the hole in the rear side panel frame. (This

does not harm the fabric.) Then mount the reflector

onto the bracket with the reflector screw. Repeat for

the bracket and reflector on the other side panel.

See illustrations.

Flatbed

: The reflectors are mounted to the reflector

™

brackets on the rear of the main frame tube. Snap

the posts on the reflectors into the openings in the

brackets, and with the provided screws, screw the

pieces together. Tighten the screws snugly, making

sure the reflector faces away from the trailer.

First, verify that the tires are inflated to 0-5 P.S.I.

Tip the trailer frame onto its rear end.

Nomad

: With the quick-release lever in the "OPEN" position, insert the wheel

™

axle assembly completely into the hollow trailer axle, making sure that the

horizontal shaft goes all the way into the axle. Once the wheel is fully seated

in the hollow axle, position the quick-release lever so that it is aimed to the

rear of the trailer in the "CLOSED" position (the lever is marked for OPEN or

CLOSED positions). Repeat

for the other wheel.

B U R L E Y T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

2.5"

Right

rear