Aquarii Zino Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Luz de inundação Aquarii Zino. Aquarii Zino 11 páginas. Slope recessed
DMX over CAT5e/6
WIRE COLOR
Brown
White / Brown
Orange
White / Orange
Green
White / Green
Blue
White / Blue
Be sure to read the Notes/Warnings below:
NOTES:
1. Pin numbering and colors are in accordance with ANSI/TIA/EIA-568 scheme T568B.
2. Pin 8 should wired as signal common even if pins 3 and 6 are NOT wired so that both conductors 7 and 8 are at equal
potential.
WARNING:
Accidental connection to non-DMX512 equipment likely to be encountered (e.g., an Ethernet Hub at a patch bay) may
result in damage to equipment. Pins 4 and 5 may carry voltages outside the EIA-485 range in telecom applications (e.g.,
telephone ringing). Pins 4 and 7 may carry voltages outside the EIA-485 range in other applications (e.g., some manufac-
turers whose distributed DMX512 buffering products require low voltage DC power may use these wires for this purpose).
Because of these various uses, mis-plugging unlike systems could cause serious damage.
DMX Addressing Information
The Zino LED Fixture requires one DMX Channel in a universe. See the example below for how to address the fixture.
• Channel 1: Intensity (0-255)
An intensity value of 0 will cause the fixture to not illuminate, while a value of 255 is the highest intensity.
See the table below for the Zino DMX Protocol:
PERSONALITY
1
FUNCTION
Pair 2 - Signal common / ground / shield (0V)
Pair 1 - Signal common / ground / shield (0V)
Pair 1 - Data negative (D-)
Pair 1 - Data positive (D+)
Pair 2 - Data negative (D-)
Pair 2 - Data positive (D+)
Unassigned
Unassigned
CHANNEL
FUNCTION
1
Intensity
IEC 60603-7
8-position Modular
Connector (RJ-45)
Pin Number
8
7
2
1
6
3
4
5
VALUE
DECIMAL
%
0 - 255
0 - 100
XLR PIN
NUMBER
1
1
2
3
4
5
HEX
00 - FF
7