Aquarii Zino Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Lampu Banjir Aquarii Zino. Aquarii Zino 11 halaman. Slope recessed

Halaman Cetak

DMX over CAT5e/6

WIRE COLOR

Brown

White / Brown

Orange

White / Orange

Green

White / Green

Blue

White / Blue

Be sure to read the Notes/Warnings below:

NOTES:

1. Pin numbering and colors are in accordance with ANSI/TIA/EIA-568 scheme T568B.

2. Pin 8 should wired as signal common even if pins 3 and 6 are NOT wired so that both conductors 7 and 8 are at equal

potential.

WARNING:

Accidental connection to non-DMX512 equipment likely to be encountered (e.g., an Ethernet Hub at a patch bay) may

result in damage to equipment. Pins 4 and 5 may carry voltages outside the EIA-485 range in telecom applications (e.g.,

telephone ringing). Pins 4 and 7 may carry voltages outside the EIA-485 range in other applications (e.g., some manufac-

turers whose distributed DMX512 buffering products require low voltage DC power may use these wires for this purpose).

Because of these various uses, mis-plugging unlike systems could cause serious damage.

DMX Addressing Information

The Zino LED Fixture requires one DMX Channel in a universe. See the example below for how to address the fixture.

• Channel 1: Intensity (0-255)

An intensity value of 0 will cause the fixture to not illuminate, while a value of 255 is the highest intensity.

See the table below for the Zino DMX Protocol:

PERSONALITY

FUNCTION

Pair 2 - Signal common / ground / shield (0V)

Pair 1 - Signal common / ground / shield (0V)

Pair 1 - Data negative (D-)

Pair 1 - Data positive (D+)

Pair 2 - Data negative (D-)

Pair 2 - Data positive (D+)

Unassigned

CHANNEL

FUNCTION

Intensity

IEC 60603-7

8-position Modular

Connector (RJ-45)

Pin Number

VALUE

DECIMAL

0 - 255

0 - 100

XLR PIN

NUMBER

HEX

00 - FF