Aquasana OptimH2O AQ-RO-3 Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Sistemas de filtragem de água Aquasana OptimH2O AQ-RO-3. Aquasana OptimH2O AQ-RO-3 16 páginas. Whole house water filter
Também para Aquasana OptimH2O AQ-RO-3: Manual do Proprietário (14 páginas), Manual do Proprietário (11 páginas), Manual do Proprietário (10 páginas)
Imprimir página
4
INSTALLATION STEPS
2
Assemble Tank
1. Install Drain Valve
assembly into
Vertical Elbow.
Wrap threaded
connection with Plumber's Tape 3
times and hand tighten.
2. Connect the Flow
Meter Assembly to
the Vertical Elbow.
The Flow Meter
should be connected
on the outlet side (left
side) at the bottom of
the tank.
3. Connect the Bypass
Manifold to Flow
Meter Assembly.
NOTE: Flow
direction arrows
on bypass are
incorrect for this
filter application.
Plumb unit
opposite of
arrows.
3
COPPER PIPES ONLY (proceed to Step 4 for all other pipes)
When installing on metallic
plumbing, ensure you take the
following precautions. Securely
install two (2) grounding clamps
and a #4 copper wire (not
included) across the location
where the system will be
installed. Tightly clamp at both
ends, as shown in the illustration.
ELECTRICAL SHOCK HAZARD
Prior to installation on metallic plumbing, securely install two grounding clamps and a #4 copper wire
per installation instructions. Failure to follow these instructions can result in death or electric shock.
4. Connect the Connectors
that are most convenient
to your system (Straight
or Angled) to the Bypass
Manifold.
5. Connect the Vertical
Elbow to the Cap
Assembly on the
bottom of the
Filter Housing.
Plugged fittings
should be
installed on
the right side.
6. Connect ⅜" PEX
Plumbing to Drain
Valve Assembly. PEX
I N
NOT PROVIDED.
O U T
7. Install 3 AAA batteries to the Umbrella
Cap; connect to Power Supply.
BATTERIES NOT PROVIDED.
Ground
Clamp
WARNING
IN
IN
O U T
I N
O U T
Ground Wire
Ground
Clamp
O U T