Diamond Audio Technology D5 300.2 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador para automóvel Diamond Audio Technology D5 300.2. Diamond Audio Technology D5 300.2 17 páginas. Professional reference series amplifier
Também para Diamond Audio Technology D5 300.2: Diagrama esquemático (4 páginas)

GAIN BYPASS SELECT
Pushing this button "IN" bypasses the gain stage on the amplifier. This is used
in systems with a pre-amp section before the amplifier or to slave the amp to
a master amplifier. Leaving this button "OUT" is the default and uses the
amplifiers gain as a normal input level match.
Q ADJUST
This knob gives you a 0-10 dB "boost" at the frequency selected when using
the subsonic filter option on the crossover section.
MONO SELECT
Pushing this button "IN" combines the input signal to create a mono signal for
use with subwoofer systems. Leaving the button "OUT" defaults the amp to
normal stereo mode.
HIGHPASS FREQUENCY
Turning this control sets the Highpass crossover point from 1.5 kHz (fully
counterclockwise) to 15 kHz (fully clockwise) or the subsonic filter point from
15 Hz (fully counterclockwise) to 1.5 kHz (fully clockwise).
SUBSONIC FILTER SELECT
Pushing this button "IN" turns the highpass crossover into a subsonic filter
dividing the frequency by 10. Leaving the button "OUT" uses the highpass
filter normally. (see highpass frequency section above for frequency points)
HIGHPASS ON/OFF
Pushing this button "IN" engages the Highpass or Subsonic filter. Pushing this
button "OUT" will bypass the filter.
LOWPASS FREQUENCY
Turning this control sets the Lowpass crossover point from 50Hz (fully
counterclockwise) to 5kHz (fully clockwise).
LOWPASS ON/OFF
Pushing this button "IN" engages the Lowpass filter. Pushing this button
"OUT" will bypass the filter.
CROSSOVER FREQUENCY DIAGRAMS
Highpass (Subsonic)
12:00
8.3 kHz
11:00
(757.5 Hz)
6.9 kHz
(609 Hz)
10:00
5.6 kHz
(460.5 Hz)
9:00
4.2 kHz
(312 Hz)
8:00
2.9 kHz
(163.5 Hz)
1.5 kHz
(15 Hz)
9 Diamond Audio Technology
1:00
9.6 kHz
11:00
(906 Hz)
200 Hz
2:00
11 kHz
10:00
(1.1 kHz)
120 Hz
3:00
12.3 kHz
9:00
(1.2 kHz)
90 Hz
4:00
8:00
13.7 kHz
70 Hz
(1.4 kHz)
15 kHz
50 Hz
(1.5 kHz)
Lowpass
12:00
350 Hz
1:00
800 Hz
2:00
1000 Hz
3:00
2200 Hz
4:00
3300 Hz
5 kHz