Aquatec SWP-4000 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Bomba de água Aquatec SWP-4000. Aquatec SWP-4000 12 páginas. Swp series solar electric submersible pump d.c. powered

Imprimir página

Fault

Pump operates but there

is no flow or reduced flow

Pump will not operate

AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15

Troubleshooting Guide

Possible Cause

1)Low voltage

2)Water supply out

3) Clogged filter screen

4) Fluid path in plumbing is

restricted or damaged/leaking

5) Pump is worn

1) Faulty power supply

2) Wire connection fault

How to Correct

1)Check power supply for proper

voltage

2) Ensure pump is installed below the

water level (maximum submergence 25

ft / 7.6 meters)

3)Clean debris from pump suction

screen

4) Check for pinched hose or clogged

tubing. Check for tubing/clamp leaks or

tears

5) Inspect components

1) Ensure adequate power supply

2) Inspect wire connections and fuses

PAGE 11 OF 12