Aquatec SWP-4000 Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Водяной насос Aquatec SWP-4000. Aquatec SWP-4000 12 страниц. Swp series solar electric submersible pump d.c. powered
Печатать страницуFault
Pump operates but there
is no flow or reduced flow
Pump will not operate
AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15
Troubleshooting Guide
Possible Cause
1)Low voltage
2)Water supply out
3) Clogged filter screen
4) Fluid path in plumbing is
restricted or damaged/leaking
5) Pump is worn
1) Faulty power supply
2) Wire connection fault
How to Correct
1)Check power supply for proper
voltage
2) Ensure pump is installed below the
water level (maximum submergence 25
ft / 7.6 meters)
3)Clean debris from pump suction
screen
4) Check for pinched hose or clogged
tubing. Check for tubing/clamp leaks or
tears
5) Inspect components
1) Ensure adequate power supply
2) Inspect wire connections and fuses
PAGE 11 OF 12