Panasonic aw-he40 series Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Câmara digital Panasonic aw-he40 series. Panasonic aw-he40 series 2 páginas. Adding another camera to existing system
Também para Panasonic aw-he40 series: Manual de instalação e configuração (12 páginas), Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual (4 páginas)

Adding Another AW-HE40 Camera to Existing System

★ This is to explain the procedure for adding another AW-HE40 camera as CAM4 to an existing system that consists

of three AW-HE40 cameras and one AW-RP50 controller.

Connect AW-HE40 LAN port and the hub using a LAN cable. (AW-HE40 can automatically recognize whether

it is a cross or straight cable.)

* LAN Cable: Category 5 or higher, Up to 100m (Category 5e or higher if connected via a PoE+ compatible hub)

By [1] CAMERA CTL setting, select [No Asign] for the CAMERA No. you want to add.

① Press MENU button. - (Fig. 1-A)

② Press [10] SYSTEM button. - (Fig. 1-B)

* If it is not displayed, turn F1 dial to make "[1] CAMERA CTL" appear.

③ While "[1] CAMERA CTL" is displayed on the LCD screen, press F1 dial. - (Fig. 1-C)

④ Turn F1 dial to make [CAM4] appear. - (Fig. 2)

⑤ Turn F2 dial to select [No Asign], then press F2 dial to determine the setting. - (Fig. 1-D)

（A）

* "[1] CAMERA CTL" will be displayed on the LCD screen. - (Fig. 2)

(Figure 1)

(Figure 2)

MENU ON ⇒ Select [10]

［1］CAMERA CTL

Press F1

（C）

1. CAM1

（D）

（B）

2. CAM2

3. CAM3

Installed & Set Already

Turn F1

4. CAM4

Turn F2 ⇒ Select "No Asign" ⇒ Press F2 to determine

Network

No Asign