HP StorageWorks 7110 - Virtual Array Instruções de atualização

Procurar online ou descarregar pdf Instruções de atualização para Interruptor HP StorageWorks 7110 - Virtual Array. HP StorageWorks 7110 - Virtual Array 12 páginas. Private loop (hubs/direct connect)
Também para HP StorageWorks 7110 - Virtual Array: Utilização do manual (34 páginas), Instruções (4 páginas), Manual (4 páginas), Manual (4 páginas), Instruções de instalação (2 páginas), Manual (2 páginas), Manual (1 páginas), Manual (1 páginas)

Imprimir página

HP StorageWorks 7110 - Virtual Array Instruções de atualização

Upgrading a VA 7100/7400

to a VA 7410/7110

This document describes the steps involved in upgrading a VA 7100 or

VA 7400 array to a VA 7410 or VA 7110 array. This procedure should only

be performed by HP service trained personnel.

Caution

All upgrades to a VA 7410/7110 require a full back up of all

data. The array is reformatted during the upgrade, which will

destroy all data on the array. It is the customer's responsibility to

ensure that all data on the array is backed up before the

upgrade is performed.

The upgrade procedure involves the following steps:

Backup all data on the array.

Gather array configuration information.

Upgrade disk firmware if necessary.

Power down the array.

Upgrade the array hardware.

Configure the upgraded array.

Create the LUN configuration.

Use previously saved data to recreate the host port behavior table and the

Secure Manager table.

Restore all data to the array.

Upgrading a VA 7100/7400 to a VA 7410/7110

Upgrade

Instructions