HP StorageWorks 8/8 - SAN Switch Nota de lançamento - Página 34
Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP StorageWorks 8/8 - SAN Switch. HP StorageWorks 8/8 - SAN Switch 43 páginas. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Também para HP StorageWorks 8/8 - SAN Switch: Nota de lançamento (30 páginas), Nota de lançamento (29 páginas), Nota de lançamento (32 páginas)
Imprimir página
B-Series Multi-protocol Router blade failed to do blade firmwaredown-
load.
Switch reboots when IFL is enabled.
Frame drop observed after creating a TI zone with failover enabled
in the backbone fabric ( TI over FCR).
Hard Zoning disabled when ports toggle.
Pathinfo doesn't match urouteshow and rtedebug.
Sensors show incorrect command output in fully loaded HP Storage-
Works DC SAN Backbone Director.
Update to VC assignment scheme within core ASIC management
structure.
Fastwrite performance issue with a particular FCIP Ex-port configuration.
Under Port Base Routing, topologyshow always shows None for the
In Port field on HP StorageWorks 8/8, 8/24, and 8/40 SAN Switches.
HCL on switch continues if sent Pause frame is rejected by attached
M-EOS switch. HCL on switch will sometimes continue, even when a
sent Pause frame is rejected by another switch in the fabric.
N_Port on Edge_AG_200E_PG got disabled with reason code Initi-
ator/target connected to N-Port.
Firmware download of Fabric OS 6.1.0 is allowed on an embedded
blade that should not allow it.
Fabric Rebuild during HP StorageWorks 8/40 SAN Switch HCL when
1 of 2 Backbones connect to a M6140 director.
If Turboramtest is performed, the Telnet console will disconnect.
Incorrect error when changed switchname for more than 24 charac-
ters through CLI in FMS mode.
F_Ports on HP StorageWorks 8/8 and 8/24 SAN Switches AG cannot
login, and become G-Ports.
Occasionally an LD port gets into a lock up state that causes port-
GetVCCredits get failed and the ISL segments with LD incomp,
although portcfgshow shows both sides of ISL config are the same.
34
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Perform slot power off / slot power
on the blade that timed out.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Disable FCR routing and Ex-ports and
merge the fabric into one large fabric.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Use urouteshow to view the 'Out
Port' selected for a particular 'In Port'
to a domain when using Port Based
Routing.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Fixed in Fabric OS 6.2.0.
Workaround prior to upgrade:
Reset with portcfgdefault/port-
cfgqos.