Diamond Products CC190PRO Manual do operador - Página 13

Procurar online ou descarregar pdf Manual do operador para Serra Diamond Products CC190PRO. Diamond Products CC190PRO 16 páginas. Concrete saw



Engine is flooded. Adjust the choke per the engine owner's



Insure blade shaft rotates freely

SAW PULLS TO ONE SIDE WHILE SAWING



Check skid plate for burrs



Check to see if rear and front guide is properly aligned with the center of the blade.



Check to see if blade is worn out, glazed, warped or damaged.



When cutting, do not twist or move the saw sideways. Make gradual changes in pressure on the handlebars

to control the saw in the cut.



Insure that all wheels rolls freely and smoothly.



Insure both wheel drives are contacting the rear wheels. Wheel drives should be clean.



If saw is pulling left, increase forward speed. Decrease speed if saw is pulling right. Do not force the saw.