Diamondback 64683 Manual do proprietário e instruções de segurança - Página 12
Procurar online ou descarregar pdf Manual do proprietário e instruções de segurança para Serra Diamondback 64683. Diamondback 64683 20 páginas. 7" heavy-duty tile saw with sliding table
Imprimir página
Miter adjustment
note: The Miter Gauge can be used from
either the left or the right side of the Blade.
1. Place the slot on the underside of the
Miter Gauge on the Table Fence.
2. Lock the Miter Gauge securely to the table by
turning the Gauge Lock Knob clockwise.
3. To adjust angles:
a. Loosen the Miter Lock Lever.
b. Set to the desired angle by moving
the Gauge left or right.
c. Tighten the Miter Lock Lever securely
before turning on the Saw.
Bevel adjustment
1. Slide the table clear of the Blade
to prevent blade damage.
2. Loosen the Bevel Lock Lever.
3. Adjust the Motor Head to the desired angle:
0º, 22.5º or 45º. Do not set bevel to
any other setting. The slots in the Table
are designed only for these cuts.
4. Tighten the Bevel Lock Lever.
Depth adjustment
1. Depth Lock: Use the Depth Lock to lock the
Motor Head in the down position; press it in while
the Motor Head is down to lock, and pull out
while holding down the Motor Head to unlock.
2. Depth Knob: The Depth Knob can be used to
lock the Motor Head at a particular cutting depth;
tighten it to lock the Motor Head in place,
loosen it to allow adjustment.
Page 12
For technical questions, please call 1-888-866-5797.
Miter Lock
Lever
Miter Gauge
Miter Gauge
Bevel Lock
Lever
Bevel Lock Lever
Depth Knob
Depth controls
Gauge
Lock Knob
table
Fence
Depth
Lock
Item 64683