Panasonic RX-D45 Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Panasonic RX-D45. Panasonic RX-D45 8 páginas. Portable stereo cd system
Também para Panasonic RX-D45: Manual de Instruções (8 páginas), Manual de Instruções (20 páginas)

Imprimir página

Using the clock and timers

Setting the clock

This is a 24-hour clock.

Press [CLOCK/TIMER].

Each time you press the button:

# PLAY ON

CLOCK

Original display

Within 5 seconds or so

Press [–/2] or [6/+] to set the time.

Holding down the button will speed up the time selection.

Press [CLOCK/TIMER] to ﬁ nish setting the time.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for few seconds.

✒

Note

• Reset the clock regularly to maintain accuracy.

• When the unit is in standby mode and it is powered by

batteries, clock will not be displayed.

Using the play timer

You can set the timer to come on at a certain time to wake you

up.

✒

Preparation

• Turn the unit on and set the clock.

• Prepare the music source you want to listen to; disc or radio

source, and set the volume.

Press [CLOCK/TIMER] repeatedly to select the play

timer.

Within 5 seconds or so

Press [–/2] or [6/+] to set the starting time.

Press [CLOCK/TIMER] to conﬁ rm.

Repeat steps 2 and 3 to set the ﬁ nishing time.

To activate the timer

Press and hold [–# PLAY] to turn on the timer.

# PLAY

Press [TAPE/OFF] to turn off the unit.

Change the

Repeat steps 1 to 4 and 6 (Z see above).

settings

Change the

1. Press and hold [–# PLAY] to clear the

source or

timer indicator from the display.

volume

2. Make changes to the source or volume.

3. Perform steps 5 and 6 (Z see above).

Check the

Press [CLOCK/TIMER] repeatedly to

select # PLAY.

settings

(when the

unit is on or in

standby mode)

Cancel

Press and hold [–# PLAY] to clear the

timer indicator from the display.

SLEEP

No display (off)

✒

Note

• The play timer will start at the preset time, with the volume

increasing gradually to the preset level.

• The timer comes on at the set time every day if the timer is

on.

• The unit must be in the standby mode for the timer to

function.

• If you turn the unit off and on again while a timer is

functioning, the ﬁ nish time setting will not be activated.

Using the sleep timer

This function enables you to turn off the unit automatically after

the set time except in tape mode.

Press [CLOCK/TIMER] repeatedly to select "SLEEP".

Press [–/2] or [6/+] to select your desired time

(in minutes).

To cancel

Press [CLOCK/TIMER] repeatedly to show the remaining time,

and press [–/2] or [6/+] to select "OFF".

Changing the remaining time

Press [CLOCK/TIMER] repeatedly to show the remaining time,

and press [–/2] or [6/+] to select your desired time.

✒

Note

• The play and sleep timer can be used together.

• The sleep timer always has priority. Be sure not to overlap

timer settings.

Using sound effects

Changing the sound quality: Sound EQ

Press [SOUND EQ] repeatedly to select your desired

setting.

EQ1 (HEAVY)

EQ2 (CLEAR)

EQ3 (SOFT)

EQ4 (VOCAL)

EQ OFF

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a

soap-and water solution or a weak detergent solution.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions

that came with the cloth carefully.

Care of tape deck's heads

Clean the heads regularly to ensure good quality playback and

recording. Use a cleaning tape (not included).

Adds punch to rock

Clariﬁ es higher frequencies

For background music

Adds gloss to vocal

Cancels the EQ selection