Panasonic RX-D45 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Panasonic RX-D45. Panasonic RX-D45 8 сторінок. Portable stereo cd system
Також для Panasonic RX-D45: Інструкція з експлуатації Посібник з експлуатації (8 сторінок), Інструкція з експлуатації Посібник з експлуатації (20 сторінок)
Друкувати сторінку
Using the clock and timers
Setting the clock
Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER].
Each time you press the button:
# PLAY ON
CLOCK
Original display
2
Within 5 seconds or so
Press [–/2] or [6/+] to set the time.
Holding down the button will speed up the time selection.
3
Press [CLOCK/TIMER] to fi nish setting the time.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
✒
Note
• Reset the clock regularly to maintain accuracy.
• When the unit is in standby mode and it is powered by
batteries, clock will not be displayed.
Using the play timer
Using the play timer
You can set the timer to come on at a certain time to wake you
up.
✒
Preparation
• Turn the unit on and set the clock.
• Prepare the music source you want to listen to; disc or radio
source, and set the volume.
1
Press [CLOCK/TIMER] repeatedly to select the play
timer.
2
Within 5 seconds or so
Press [–/2] or [6/+] to set the starting time.
3
Press [CLOCK/TIMER] to confi rm.
4
Repeat steps 2 and 3 to set the fi nishing time.
To activate the timer
5
Press and hold [–# PLAY] to turn on the timer.
# PLAY
6
Press [TAPE/OFF] to turn off the unit.
Change the
Repeat steps 1 to 4 and 6 (Z see above).
settings
Change the
1. Press and hold [–# PLAY] to clear the
source or
timer indicator from the display.
volume
2. Make changes to the source or volume.
3. Perform steps 5 and 6 (Z see above).
Check the
Press [CLOCK/TIMER] repeatedly to
select # PLAY.
settings
(when the
unit is on or in
standby mode)
Cancel
Press and hold [–# PLAY] to clear the
timer indicator from the display.
SLEEP
No display (off)
✒
Note
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is
on.
• The unit must be in the standby mode for the timer to
function.
• If you turn the unit off and on again while a timer is
functioning, the fi nish time setting will not be activated.
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically after
the set time except in tape mode.
1
Press [CLOCK/TIMER] repeatedly to select "SLEEP".
2
Press [–/2] or [6/+] to select your desired time
(in minutes).
To cancel
Press [CLOCK/TIMER] repeatedly to show the remaining time,
and press [–/2] or [6/+] to select "OFF".
Changing the remaining time
Press [CLOCK/TIMER] repeatedly to show the remaining time,
and press [–/2] or [6/+] to select your desired time.
✒
Note
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap
timer settings.
Using sound effects
Changing the sound quality: Sound EQ
Changing the sound quality: Sound EQ
Press [SOUND EQ] repeatedly to select your desired
setting.
EQ1 (HEAVY)
EQ2 (CLEAR)
EQ3 (SOFT)
EQ4 (VOCAL)
EQ OFF
Maintenance
If the surfaces are dirty
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a
soap-and water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
Care of tape deck's heads
Care of tape deck's heads
Clean the heads regularly to ensure good quality playback and
recording. Use a cleaning tape (not included).
Adds punch to rock
Clarifi es higher frequencies
For background music
Adds gloss to vocal
Cancels the EQ selection
7