DiBiQuadro GeminiPTE Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Stereo Equalizer DiBiQuadro GeminiPTE. DiBiQuadro GeminiPTE 11 páginas.
Imprimir páginaTolerance. This feature can be used to
apply
random
variations
component of the channel circuits. You
can
increase
or
percentage deviation (default value:
5.0%) and apply it separately to the
passive sections with "ApplyToPassive"
(HiBoost, HiCut, LoBoost, LoCut) or to
the tube section ("ApplyToActive").
When checked, "AutoReset" always
resets
each
component
channel circuits to its default value
before applying the random variation.
Primary
tabs:
NonLinearSolver.
The
provide
access
channels of GeminiPTE and to the
triode model. Each channel can be
tweaked independently or at the same
time depending on the state of the
"LINK" button in the GUI, while there
can be only one triode model for all
triodes in the circuit simulations.
Secondary
tabs:
LoBoost, LoCut, Active. They provide
access to the different sections of the
circuit.
to
each
decrease
the
of
both
L/M,
R/S
and
primary
tabs
to
the
different
HiBoost,
HiCut,
TWEAK window – NonLinearSolver tab
NonLinearSolver tab. Use this section to
change
the
characteristics
triodes in the channels. The easiest way
to tweak the triode characteristics is to:
1. Modify the name in the DtpFile
textbox.
2. Change one or more parameters
of the triode model
3. Press GENERATE button.
DONE. It closes the SET window.
1
Take a look at https://www.dafx.de/paper-
archive/2011/Papers/76_e.pdf for more details.
10
of
the
.
1