Olympus CH30 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus CH30. Olympus CH30 28 páginas. Biological microscope
Também para Olympus CH30: Manual de instruções (29 páginas)

Imprimir página

IMPORTANT

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols, and always use the

microscope in the safest possible manner.

1 . Make sur that the voltage selector switch @ located on the underside

of the base of the microscope frame is set to conform with the local

'mains voltage. Move the switch using an Allen wrench, etc. (Fig. 1)

230-240V in 100V and 2009 areas, respectively.

2 . To avoid potential shock hazard and fire, always switch the main switch

before replacing the bulb. Allow the lamp housing cover @and the bull

to cool before touching,

3. Install the microscope on a level table. The air vents on the underside of

the base should never

be blocked such as by placing the microscope on

a flexible surface, e.g., a carpet, etc, as this could result in overheating

and cause a fire,

4. Always use the power cord provided by Olympus. If no power cord is

provided, please select the proper power cord by referring to the section

"PROPER SELECTION OF THE POWER SUPPLY CORD" ar the end of

this instruction manual. If the proper power cord is not used, Olympus

can no longer warrant the electrical safety and performance of the

equipment

5 . Connect the power cord correctly and ensure that the ground terminal

of the power supply and that of the wall outlet are properly connected

H the equipment is not grounded, Olympus can no longer warrant the

electrical safety and performance of the equipment.

6. Never insert metal objects, etc. into the air vents of the microscope

frame as this will result in electrical shock and/or personal injury.

Symbol

Explanation

Indicates that the surface becomes hot, and should not be touched with bare

hands,

Before use, carefully read the instruction manual. Improper handling could

result in injury to the user and/or damage to the equipment.

Indicates that the main switch is ON,

Indicates that the main switch is OFF.