Olympus CH30 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus CH30. Olympus CH30 28 сторінок. Biological microscope
Також для Olympus CH30: Інструкція з експлуатації (29 сторінок)
![Olympus CH30 Інструкція з експлуатації](/uploads/products/server2/4282449/4282449.jpg)
IMPORTANT
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols, and always use the
microscope in the safest possible manner.
1 . Make sur that the voltage selector switch @ located on the underside
of the base of the microscope frame is set to conform with the local
'mains voltage. Move the switch using an Allen wrench, etc. (Fig. 1)
© When shipped from the factory, the switch is set to 110-120V and
230-240V in 100V and 2009 areas, respectively.
2 . To avoid potential shock hazard and fire, always switch the main switch
© to "O" (OFF) and disconnect the power cord from the wall outlet
before replacing the bulb. Allow the lamp housing cover @and the bull
to cool before touching,
3. Install the microscope on a level table. The air vents on the underside of
the base should never
be blocked such as by placing the microscope on
a flexible surface, e.g., a carpet, etc, as this could result in overheating
and cause a fire,
4. Always use the power cord provided by Olympus. If no power cord is
provided, please select the proper power cord by referring to the section
"PROPER SELECTION OF THE POWER SUPPLY CORD" ar the end of
this instruction manual. If the proper power cord is not used, Olympus
can no longer warrant the electrical safety and performance of the
equipment
5 . Connect the power cord correctly and ensure that the ground terminal
of the power supply and that of the wall outlet are properly connected
H the equipment is not grounded, Olympus can no longer warrant the
electrical safety and performance of the equipment.
6. Never insert metal objects, etc. into the air vents of the microscope
frame as this will result in electrical shock and/or personal injury.
Symbol
Explanation
Indicates that the surface becomes hot, and should not be touched with bare
hands,
Before use, carefully read the instruction manual. Improper handling could
result in injury to the user and/or damage to the equipment.
Indicates that the main switch is ON,
A
A
|
o
Indicates that the main switch is OFF.