Olympus CX21LED Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Microscópio Olympus CX21LED. Olympus CX21LED 28 páginas. Biological microscope

Fig. 6

Adjusting the Focus

Fig. 7

Fig. 8

Specimen holder scales (Fig. 6)

}Theses scales allow the position (coordinates) being observed on the

specimen to be identified. Even after the specimen is moved, it can be

returned easily to the original position.

1. The horizontal coordinate can be read at position 1 on the specimen

holder.

2. The vertical coordinate can be read at the position of index line 2.

Focusing Procedure

1. Rotate the coarse adjustment knob @ in the direction of the arrow so

that the objective 3 is as close as possible to the specimen.

2. While observing the specimen through the eyepieces, slowly rotate the

coarse adjustment knob 1 in the opposite direction to the arrow to lower

the stage.

3. When coarse focusing of the specimen is obtained, rotate the fine

adjustment knob 2 to adjust to precise focus.

Working Distance (WD)

}The WD refers to the distance between each objective and the specimen,

when precise focus of the specimen is obtained.

Objective

Magnification

WD (mm)

Adjusting the Tension of the Coarse Adjustment Knob (Fig. 8)

1. The tension of the coarse focus adjustment knob has been designed

adjustable with a ring. Insert the tip of a large flat-blade screwdriver into

the groove 2 on the tension adjustment ring 1 and rotate the ring. Ro-

tating it clockwise (in the direction of the arrow) increases the tension

and counterclockwise decreases the tension.

2. If the stage descends on its own or if the specimen gets out of focus

quickly even when it is brought into focus using the fine adjustment

knob, it means that the tension of the coarse adjustment knob is too low.

Turn the ring 1 in the direction of the arrow to increase the tension.

10X

40X

18.5

10.6

0.6

CX21LED

(Fig. 7)

100X

0.13