Axkid Rekid Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Mobiliário para bebés e crianças Axkid Rekid. Axkid Rekid 16 páginas.

Once there is an audible click and both

indicators (4) are green they are properly

secured. To remove the Rekid child re-

straint, hold both of the release buttons

(5).

To adjust the angle of the child restraint,

press the Recline Adjustment Lever (6)

to select one of the three reclining posi-

tions. Always choose the most upright

position as possible, however your child

must be able to hold their head up on

its own, and there should be enough re-

cline to ensure your child's head does not

fall forward when sleeping. The rule of

thumb is that the older the child grows,

the more upright the seat can be installed.

Please note that once the installation of

the Rekid is complete, it will be somewhat

more reclined as it sinks into the vehicle's

seat when tightening seat belts and tether

straps.

Attaching the lower tether straps

Some vehicles may already be fitted with

anchorage points at the base of the front

seat rails.

If your vehicle does not have these anchor

points, the supplied lower tether straps

must be used to create anchor points. For

tips on how to install these tether straps

please see the example on the next page.

The anchoring point needs to be as close

to the floor as possible. In doing so you

should always insert the buckle through

the closest appropriate slot in the strap

to create a slip knot and pull tight. This

Continued on next page

Lower tether straps