Olympus CIX100 Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório Olympus CIX100. Olympus CIX100 46 páginas. Cleanliness inspector system
Também para Olympus CIX100: Manual de configuração de sistemas (38 páginas), Manual de instalação (14 páginas)

Imprimir página

OLYMPUS CIX100 Cleanliness Inspector System

Sample holders for the OLYMPUS CIX100 Cleanliness

Inspector System

1.1 Introduction

The OLYMPUS CIX100 Cleanliness Inspector System includes a sample holder for

the inspection of particles on filter membranes with a diameter of 47 mm. With

optional additional accessories, filter membranes of different diameters (25 mm,

47 mm and 55 mm) with either white or black background, particle traps and tape

lift samples can be analyzed in your CIX100 system. This manual describes how to

integrate each of these optional sample holders and sample types to your CIX100

system for optimal usability.

1.2 Intended use

All sample holders and accessories mentioned in this manual are intended for the

inspection of technical cleanliness. It is mandatory to follow the sample preparation

procedure for each type of sample, which is described according to the

applications and the standard used. Follow the mounting instructions for each

sample type as outlined in this manual. All sample holders are designed for use

under normal environmental conditions. Use under oxidative or acidic

environmental conditions as well as high temperatures should be avoided.

1.3 About these instructions

These instructions are part of the documentation for the OLYMPUS CIX100

Cleanliness Inspector System. Further information about the operation of the

OLYMPUS CIX100 Cleanliness Inspector System can be found in the CIX100 System

Setup Guide and in the CIX ASW software documentation. Read all of the other

instructions for the components of the system carefully.