Olympus CIX100 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лабораторне обладнання Olympus CIX100. Olympus CIX100 46 сторінок. Cleanliness inspector system
Також для Olympus CIX100: Посібник з налаштування системи (38 сторінок), Посібник з монтажу (14 сторінок)
Друкувати сторінку
OLYMPUS CIX100 Cleanliness Inspector System
1
Sample holders for the OLYMPUS CIX100 Cleanliness
Inspector System
1.1 Introduction
The OLYMPUS CIX100 Cleanliness Inspector System includes a sample holder for
the inspection of particles on filter membranes with a diameter of 47 mm. With
optional additional accessories, filter membranes of different diameters (25 mm,
47 mm and 55 mm) with either white or black background, particle traps and tape
lift samples can be analyzed in your CIX100 system. This manual describes how to
integrate each of these optional sample holders and sample types to your CIX100
system for optimal usability.
1.2 Intended use
All sample holders and accessories mentioned in this manual are intended for the
inspection of technical cleanliness. It is mandatory to follow the sample preparation
procedure for each type of sample, which is described according to the
applications and the standard used. Follow the mounting instructions for each
sample type as outlined in this manual. All sample holders are designed for use
under normal environmental conditions. Use under oxidative or acidic
environmental conditions as well as high temperatures should be avoided.
1.3 About these instructions
These instructions are part of the documentation for the OLYMPUS CIX100
Cleanliness Inspector System. Further information about the operation of the
OLYMPUS CIX100 Cleanliness Inspector System can be found in the CIX100 System
Setup Guide and in the CIX ASW software documentation. Read all of the other
instructions for the components of the system carefully.
4