Olympus MX61A Manual - Página 7

Procurar online ou descarregar pdf Manual para Equipamento de laboratório Olympus MX61A. Olympus MX61A 48 páginas. Motorized 300 mm compatible semiconductor/fpd inspection microscope

Imprimir página

MX61A external view, eye point and center of gravity: When the 8x8-inch stage is combined

Eye point

(Bottom view of microscope)

(Note) The center of gravity is an approximate position when the microscope is equipped with the standard module

combination for transmitted light observation. Note that the position is variable depending on the weight of speci-

men, position of the stage and other modules used.

9. To prevent toppling of the microscope system, keep the total height of the microscope below 1 meter (3.3 ft) when

attachments (including Olympus optional modules and the CCD camera prepared by the customer) are mounted.

Fig. 1

10. Each microscope has screw holes (M5, depth 10 mm) for prevention of

toppling (in the case of an earthquake or microscope imbalance) on the

side panels @ (x 2 holes) and the rear panel ² (x 2 holes). Clamp the

microscope using L-shaped clamps and these screw holes as required.

When clamping the microscope using L-shaped clamps prepared

by the customer, be sure to use steel bolts (strength category 12.9)

with as long as possible threaded sections (8 mm or more is rec-

ommended).

Unit: mm

Position of center of gravity

MX61A