Olympus OMCL-AC160TS-W2 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório Olympus OMCL-AC160TS-W2. Olympus OMCL-AC160TS-W2 4 páginas. Micro cantilever
Imprimir página
When you set your samples to your instrument, please consider the unique shape of the
tetrahedral tip, that is 'good symmetry', when viewing from its front side and choose the
direction of the sample. When measuring long grooves, you can get an idea of what angle of
the cut will be quickly by aligning the cantilever along the grooves and scanning across at
right angles against grooves (see below).
- 7e -
5
Trouble-shooting Guide
Situations as described below may arise when using this type of cantilever.
Case: In adjusting the sensor optics before scanning, the movement of the reflection spot on
the photo detector is critical so that the sensor optics is hard to adjust to zero position.
When the sensor illumination spot on the cantilever is not small enough and is positioned
at the triangular part of the cantilever, unexpected reflection and light scattering occur.
This may cause the unexpected movement of the reflection spot on the photo detector.
Solution:
Try to adjust the focus of the sensor optics again and move the spot position a little
opposite to the free end of the cantilever.
6
Information
Please contact following if you have any question on this user's manual.
OLYMPUS CORPORATION
Microtechnology R&D Division
2-3 Kuboyama-cho Hachioji-shi Tokyo 192-8512 Japan
email : [email protected]
Please access to the web page of OLYMPUS micro cantilevers.
http://www.olympus.co.jp/probe
Ver. 4.0 Sep. 18, 2009
OLYMPUS CORPORATION
- 8e -