AXMINSTER TOOLS WORKSHOP AW1502WSG Manual de instruções original - Página 10
Procurar online ou descarregar pdf Manual de instruções original para Moedor AXMINSTER TOOLS WORKSHOP AW1502WSG. AXMINSTER TOOLS WORKSHOP AW1502WSG 17 páginas.
Imprimir páginaCHANGING THE GRINDING STONE
Step 5-6
Remove plate flange and carefully remove the stone.
Clean the interior stone guard, inspect the new stone
for cracks and damage to either the front face or the
edges before fitting. Carefully slide the stone on the
shaft, replace the plate flange, the nut and tighten
against the rotation of the stone. DO NOT
OVERTIGHTEN.
Step 7
CONNECT THE GRINDER
TO THE MAINS SUPPLY.
Reconnect the grinder to the mains supply, give the
grinder a 'short burst', by switching it on and off
quickly. Check the grinder is not subject to any
undue vibration. If the grinder does vibrate, switch off
immediately and disconnect from the mains supply.
Remove the guard cover and check stone and plate
flange is fitted correctly. Check again, if the grinder
is still vibrating the stone/s may need dressing. Dress
the new stone lightly to ensure a 'good face' and good
concentricity.
10
Step 8-9-10