ARC LYCR-300 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Recetor ARC LYCR-300. ARC LYCR-300 2 páginas. Dimmer receiver

USER MANUAL

Model LYCR-300 Dimmer Receiver

FEATURES:

● No wiring, easy operation, just plug and use.

● 67 million codes, self program function receiver.

● Receiver has 6 memory settings, no memory loss forever.

● Red LED indicator for POWER ON and PROGRAMMING SETTINGS.

● Transmitter with 16 receivers control on paged channel.

INSTALLATION:

Controller (Receiver)

● Just plug-in receiver into wall outlet

● Indicator on receiver should light on.

● Connect lamp plug into receiver

Remote control (Transmitter)

● Remote control till 30M in open area

OPERATION

ON/OFF RECEIVER

* Press transmitter button 'ON' to switch on.

* Press transmitter button 'OFF' to switch off.

DIMMER RECEIVER

* Press transmitter button 'ON' twice, light will start to dim, press again, light stops at required brightness.

HOW TO LINK CODE:

To start, program your transmitter with the receiver.

* Receiver plugged on power

* Bring the transmitter near the receiver, push the self program button on receiver once

* Receiver led will blink slowly, press transmitter selected "ON" button

* Receiver connected lamp will blink twice, code is confirmed and led stops blinking.

* Remember the transmitter button you selected for the programmed receiver.

* Transmitter and Receiver codes are auto programmed.

TO CHANGE OR DELETE CODE :

INDIVIDUAL DELETE -

* Push the self program button once, led will blink slowly

* Press selected "OFF" button on transmitter, programmed memory is deleted.

* Receiver connected lamp will blink twice for confirmation.

* Repeat step for re-setting