ARC LYCR-300 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Recetor ARC LYCR-300. ARC LYCR-300 2 páginas. Dimmer receiver

ALL MEMORY DELETE -

* Push the self program button till the LED blinking continuously

* Release and push again once.

* Receiver connected lamp will blink twice for confirmation.

* ALL PROGRAMMED MEMORY WILL BE DELETED FROM RECEIVER

RECEIVER HAS 6 MEMORY SETTINGS :

* Self program function RECEIVER has 6 memory settings.

* It can be programmed as to your requirement with special effect. It can be programmed to switch ON at one time individually

or programmed with different combinations switching.

* This means one receiver can be programmed into max. 6 different combination.

Example :

If there is 3 receivers, [ receiver 1 = lamp shade , receiver 2 = night light , receiver 3 = fan ]

Receiver 1,2,3 can be control individually with transmitter button 1,2,3

Receiver 1,3 can be programmed with transmitter button 4, (lamp shade and fan ON/OFF at same time)

(Above settings 'Receiver 1' and '3' takes up 2 programmed memory and 'Receiver 2' only 1 program memory, different combinations

and settings can be teamed up and control from transmitter )

SPECIFICATION

RECEIVER

Frequency: 433.92MHz

Power: 240V +/-10%, 50Hz

300 watt / 230VAC (incandescent lamp)

FAULT FINDING

No activation :

Check battery polarity or running out battery

Check code program successful.

CAUTION :

Do not place two receivers near each other, the distance should be above 1 meter.

Warning!

DO NOT OVERLOAD

Do not plug or use in damp places like patios, cellar, flammable liquid, solvents, paints etc...