Arcade Orbit Overwatch Drone Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Drones Arcade Orbit Overwatch Drone. Arcade Orbit Overwatch Drone 11 páginas.

Imprimir página

Remote controller functions

11) Power button
12) Speed button
13) Left stick (throttle)
14) Headless mode
15) LED ON/OFF switch
16) Emergency stop
17) Trim button (left spin)
18) Photo button
19) One key return
20) Trim button (right spin)
21) LED indicator
12
13
15
16
4
22) Trim button (left)
23) Video button
24) Trim button (backwards)
25) Trim button (right)
26) One key land
27) One key take-off
28) Trim button (forwards)
29) Right stick (rudder)
30) Flip button
31) Battery cover
11
20
22
14
28
19
24
21
18
23
17
25
31

Pre-flight preparation

Charging the battery
Ensure the battery is removed from the Drone. Using the supplied USB charging cable, connect one end to the battery
and connect the USB end to a power supply. An indicator light on the USB charging cable will turn ON to indicate
it is charging. Charge for 45 minutes to ensure the battery is fully charged. When fully charged, the indicator light will
turn OFF. Repeat this process for recharging the battery each time.
Note: We recommend charging the battery outside of the Drone to reduce heat build. High temperatures can
damage both the Drone and the battery.
Remote controller
1. Carefully remove the Battery cover (31), using the Screwdriver provided and insert 3 x AA batteries*, according to
indicated polarity. Then replace the back cover of the controller
2. Make sure the batteries (AA) are correctly installed under the supervision of an adult. Refrain from mixing old and
new batteries as well as different types
*Note: Batteries are not included.
30
Surroundings
• The Orbit Overwatch is fast, so when taking off, move the Left stick (13) upwards gradually to prevent rising
too high, too quickly
29
• To avoid injury or damage, the Drone should not be flown within 2 metres/7 feet from people or objects
• To reduce the risk of damaging the Drone, objects or injuring other people, we recommend flying outside
with plenty of clear/open space
27
• To prevent irreparable damage, keep the Drone dry and away from water. Do not fly in rainy conditions
• Avoid flying the Drone in strong wind, especially at high altitude, to avoid the Drone drifting away
26
• Always keep the Drone in clear sight when flying
• When flying using the VR Headset, ensure the area around you is clear of obstacles/hazards
Drone
Finally, before flying, check the Drone for any signs of damage (e.g. broken blade). If damage is found, do not fly
the Drone until repairs have been made, as this may result in further damage.
When replacing blades, take care to ensure that they are placed onto the correct motor as shown in the diagram
(using the screwdriver provided to remove and replace the holding screw). There are two Type A blades, and two
Type B blades on the Drone. The blades are labelled A or B, as are each motor on the Drone to help match these up.
A1
B2
B1
A2
5