Arcade Orbit Overwatch Drone Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Drones Arcade Orbit Overwatch Drone. Arcade Orbit Overwatch Drone 11 páginas.

Basic flight controls

Ascend/Descend

Left spin/Right spin

Forward/Backward

Leftward fly/Rightward fly

Note: When the Drone's LED indicators (3) begin to flash, it is indicating that the battery is running low. You should fly

the Drone back to where you are and land as soon as possible. The Drone will automatically begin to descend, so

ensure you give you direct the Drone to a safe place to land.

Sometimes you will find the Drone will start to drift in a particular direction of its own accord. To correct this, you can

manually 'trim' the Drone to allow it to adjust its flight.

Below shows you how to rectify the drifting (black arrows indicate drift direction; the white arrows indicate the

corrective trim direction):

Left/Right spin trim

Leftward/Rightward trimming

Forward/Backward trimming

You can use this to function to reset the Drone. Ensure the Drone is on a level surface before Auto Trimming.

Note: some manual trimming may be required after performing this function. See Trimming the Drone for further

instructions on how to do this manually.

Push both the Left stick (13) and Right stick (29) to the bottom left corners, at the same time. Once the lights stop

flashing, the calibration is complete.

The Orbit Overwatch has 3 different flight speeds to choose from; low, medium and high. To select your desired

speed, press down the Speed button (12). The Controller will then indicate which speed mode you have selected

in the following ways:

Low speed:

The controller will beep once

Medium speed:

The controller will beep twice

High speed:

The controller will beep three times