Arcam ST5 Manual do Proprietário - Página 13
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Arcam ST5. Arcam ST5 16 páginas.
Imprimir páginaTroubleshooting
Problem
No sound
The streamer does not respond to the remote control
The front panel display is blank
Cannot control the volume
Cannot discover the streamer in an app
Specifications
Interfaces
USB
Ethernet
Wi-Fi
Analog Outputs
Digital to Analog Converter
Signal/Noise Ratio (Awtd)
Harmonic Distortion (1kHz)
Frequency response
Output level (fixed)
Output Impedance
Jitter RMS
General
Mains voltage
Maximum power consumption
Dimensions in mm (including feet, control knob and
connectors)
Weight (net)
Weight (gross)
13
ARCAM ST5 Owner's Manual EN
Check the following
Is the streamer correctly plugged in and switched on?
Is the streamer correctly connected to the amplifier, with the correct input selected?
Is the amplifier muted?
Is the correct output mode selected (Analog or Digital)? (See menu on page 11)
Are there fresh batteries in the remote control?
Are you pointing the remote control towards the amplifier window without obstruction?
Is the streamer correctly plugged in and switched on?
Is the streamer in standby?
Is the display dimmed to "Off"?
Press the
button on the remote control.
Is Fixed volume enabled? (See menu on page 12)
Is Digital output selected? (See menu on page 12)
Is the streamer correctly plugged in and switched on?
Does the streamer have a network connection, wired by Ethernet or Wi-Fi?
For Wi-Fi connections, has setup been completed using the JBL Premium Audio app?
Is your smartphone or tablet connected to the same local network?
USB 2.0 High Speed (480Mbps)
10/100Mbps
802.11b/g/n
ESS ES9018K2M
115dB
< 0.007%
10 Hz – 20 kHz ± 0.05dB
2.0V rms
47Ω unbalanced
< 20 psec
100–240V, 50/60Hz
12W
431 W x 57 H x 328 D
3.5kg
5.6kg