Arcam ST5 Kullanıcı El Kitabı - Sayfa 13

Amplifikatör Arcam ST5 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Arcam ST5 16 sayfaları.

Sayfayı Yazdır

Troubleshooting

Problem

No sound

The streamer does not respond to the remote control

The front panel display is blank

Cannot control the volume

Cannot discover the streamer in an app

Specifications

Interfaces

USB

Ethernet

Wi-Fi

Analog Outputs

Digital to Analog Converter

Signal/Noise Ratio (Awtd)

Harmonic Distortion (1kHz)

Frequency response

Output level (fixed)

Output Impedance

Jitter RMS

General

Mains voltage

Maximum power consumption

Dimensions in mm (including feet, control knob and

connectors)

Weight (net)

Weight (gross)

ARCAM ST5 Owner's Manual EN

Check the following

Is the streamer correctly plugged in and switched on?

Is the streamer correctly connected to the amplifier, with the correct input selected?

Is the amplifier muted?

Is the correct output mode selected (Analog or Digital)? (See menu on page 11)

Are there fresh batteries in the remote control?

Are you pointing the remote control towards the amplifier window without obstruction?

Is the streamer correctly plugged in and switched on?

Is the streamer in standby?

Is the display dimmed to "Off"?

Press the

button on the remote control.

Is Fixed volume enabled? (See menu on page 12)

Is Digital output selected? (See menu on page 12)

Is the streamer correctly plugged in and switched on?

Does the streamer have a network connection, wired by Ethernet or Wi-Fi?

For Wi-Fi connections, has setup been completed using the JBL Premium Audio app?

Is your smartphone or tablet connected to the same local network?

USB 2.0 High Speed (480Mbps)

10/100Mbps

802.11b/g/n

ESS ES9018K2M

115dB

< 0.007%

10 Hz – 20 kHz ± 0.05dB

2.0V rms

47Ω unbalanced

< 20 psec

100–240V, 50/60Hz

12W

431 W x 57 H x 328 D

3.5kg

5.6kg